Car System

Car System

Major Lift Jacking Beam HPJ4

Features

HPJ4 4 tonne hand operated.

A 4 tonne capacity unit that is purpose designed for the heavyweight 4x4s. It has the power and with optional 180mm extension tubes, the reach to cope with these high axle vehicles.

Technical specification

RATED 2 TONNES RATED 2.8 TONNES RATED 4 TONNES RATED 6 TONNES
MOT Approval for Class 4 Class 7
Part No. Manual HPJ2 HPJ2.8 HPJ4 N/A
Part No. Air/Hydraulic MPJ2 MPJ2.8 MPJ4 MPJ6
A Width when extended 1700mm – 67″ 1700mm – 67″ 1605mm – 63″ 1300mm – 51″
B Width when retracted 800mm – 31.5″ 815mm – 32″ 864mm – 34″ 910mm – 35.8″
C Minimum width over support arms 775mm – 30.5″ 790mm – 31″ 830mm – 32.5″ 920mm – 36.2″
D Maximum width over support arms 1125mm – 44″ 1130mm – 44.5″ 1300mm – 51″ 1290mm – 50.7″
E Closed height 212mm – 8.25″ 242mm – 9.5″ 261mm – 10.25″ 320mm – 12.6″
F Total lift 260mm – 10.25″ 260mm – 10.25″ 205mm – 8″ 200mm – 7.8″
*G Height above platform/floor 75mm – 2.9″ 92mm – 3.6″ 97mm – 3.8″ 101mm – 3.9″
*can be set lower with special arms if required
Weight – with top beam 87kgs – 192lbs 113kgs – 249lbs 155kgs – 341lbs 224kgs – 494lbs
Narrow Jacking Beams to fit narrow pits and lifts (pump mounted externally)
C Minimum width over support arms 685mm – 27″ 700mm – 27.58″ N/A N/A
D Maximum width over support arms 1015mm – 40″ 1020mm – 40.5″ N/A N/A
OPTIONAL EXTRA WIDE TOP BEAM
A Width when extended 1850mm – 73″ 1850mm – 73″ N/A N/A
B Width when retracted 950mm – 37.5″ 963mm – 38″ N/A N/A
RAISER BLOCKS RATED 2 TONNES RATED 2.8 TONNES RATED 4 TONNES RATED 6 TONNES
Part No.
1532A Standard Standard Standard Standard
1526 Standard Standard Standard N/A
1835 N/A N/A N/A Standard
1836 N/A N/A N/A Standard
1527 Optional Optional Standard N/A
1532C Optional Optional Optional Optional
1532V Optional Optional Optional Optional

Jacking Beam Brands

Scope logo
Major logo